Discontinued Product
BP Energrease HTG 2
Industrial Greases and Pastes
Mineral oil based grease with inorganic soap and high thermal stability.
Energrease HTG 2 is recommended for use in plain and rolling bearings working on high temperature, in the bearings of metallurgical cranes, etc.
It has excellent moist, dust, shock load and vibration resistance. This grease both resists hot and cold water, as well as to alkalis.
Performance claims:
KP2N-20
NLGI 2
DIN 51502
DIN 51825
Operating temperature range:
-20 °C to +150 °C (+220 °C for short-term)
Typical characteristics:
Soap type: betonite/polymer
Worked penetration (ISO 2137): 265 - 295 (0.1 mm)
Base oil viscosity at 40 °C: 170 mm2/sec
Dropping point: > 300 °C
Water resistance at 90 °C, after 5 hours: 0 change
Replacement product: CASTROL Spheerol BNS 2
Energrease HTG 2 is recommended for use in plain and rolling bearings working on high temperature, in the bearings of metallurgical cranes, etc.
It has excellent moist, dust, shock load and vibration resistance. This grease both resists hot and cold water, as well as to alkalis.
Performance claims:
KP2N-20
NLGI 2
DIN 51502
DIN 51825
Operating temperature range:
-20 °C to +150 °C (+220 °C for short-term)
Typical characteristics:
Soap type: betonite/polymer
Worked penetration (ISO 2137): 265 - 295 (0.1 mm)
Base oil viscosity at 40 °C: 170 mm2/sec
Dropping point: > 300 °C
Water resistance at 90 °C, after 5 hours: 0 change
Replacement product: CASTROL Spheerol BNS 2