CASTROL Optigear Synthetic 1710 / 320
Industrial Gear Oils
Optigear Synthetic 1710/320 is a high-performance, semi-synthetic extreme pressure gear oil, developed to help tackle wear-related problems in heavily loaded industrial gears and bearings.
It is formulated with Castrol's Tribol Gear Oil Additive (TGOA) Plastic Deformation (PD) additive and high quality mineral base oils and synthetic polyalphaolefins.
Typical applications of Optigear Synthetic 1710 are in spur, helical, herringbone, bevel and planetary gears as well as in geared couplings, rolling and sliding bearings and in gear drive circulating systems.
Depending on the application, Optigear Synthetic 1710 may be used in a temperature range from -30 °C (-22 °F) up to +95 °C (203 °F).
Optigear Synthetic 1710/320 is a CLP-HC gear oil (DIN 51502) and exceeds the minimum requirements of DIN 51517 T.3.
TGOA PD additive technology helps improve lubricant performance when operating temperature and loads reach a certain level of activation energy by enabling the micro-smoothing of surface roughness without increasing wear. The smoothed surface delivers optimum wear protection and an extremely low coefficient of friction, especially in applications which experience extreme pressure, shock loads, vibrations or low speeds. TGOA PD helps to protect against scuffing and shock loading while maintaining a high load-carrying capacity and can help prevent the progression of micro-pitting in pre-damaged gears.
These gear oils are compatible with most mineral oil, ester and synthetic based products. This means that traces of up to 3% of previous oil in the gear case after draining will not pose any problems. However, the beneficial effects of the TGOA additives are reduced when Optigear Synthetic 1710 oils are mixed with other gear oils. Optigear Synthetic 1710 oils are not compatible with polyglycols. After draining a polyglycol fill, the gear case must be flushed well with mineral oil or flushing oil.
Technical data:
Viscosity at 40 °C (104 °F): 320 mm2/sec - ISO VG 320
Viscosity at 100 °C (212 °F): 31.2 mm2/sec
Viscosity index: 138
FZG Gear Scuffing test, A/8.3/90: >12
FZG Gear Scuffing test, A/16.6/90: >12
FZG Micropitting test at 90 °C (194 °F): >10 (high rating)
Optigear Synthetic 1710/320 was previously called CASTROL Tribol 1710/320. Its name was changed in 2015.
It is formulated with Castrol's Tribol Gear Oil Additive (TGOA) Plastic Deformation (PD) additive and high quality mineral base oils and synthetic polyalphaolefins.
Typical applications of Optigear Synthetic 1710 are in spur, helical, herringbone, bevel and planetary gears as well as in geared couplings, rolling and sliding bearings and in gear drive circulating systems.
Depending on the application, Optigear Synthetic 1710 may be used in a temperature range from -30 °C (-22 °F) up to +95 °C (203 °F).
Optigear Synthetic 1710/320 is a CLP-HC gear oil (DIN 51502) and exceeds the minimum requirements of DIN 51517 T.3.
TGOA PD additive technology helps improve lubricant performance when operating temperature and loads reach a certain level of activation energy by enabling the micro-smoothing of surface roughness without increasing wear. The smoothed surface delivers optimum wear protection and an extremely low coefficient of friction, especially in applications which experience extreme pressure, shock loads, vibrations or low speeds. TGOA PD helps to protect against scuffing and shock loading while maintaining a high load-carrying capacity and can help prevent the progression of micro-pitting in pre-damaged gears.
These gear oils are compatible with most mineral oil, ester and synthetic based products. This means that traces of up to 3% of previous oil in the gear case after draining will not pose any problems. However, the beneficial effects of the TGOA additives are reduced when Optigear Synthetic 1710 oils are mixed with other gear oils. Optigear Synthetic 1710 oils are not compatible with polyglycols. After draining a polyglycol fill, the gear case must be flushed well with mineral oil or flushing oil.
Technical data:
Viscosity at 40 °C (104 °F): 320 mm2/sec - ISO VG 320
Viscosity at 100 °C (212 °F): 31.2 mm2/sec
Viscosity index: 138
FZG Gear Scuffing test, A/8.3/90: >12
FZG Gear Scuffing test, A/16.6/90: >12
FZG Micropitting test at 90 °C (194 °F): >10 (high rating)
Optigear Synthetic 1710/320 was previously called CASTROL Tribol 1710/320. Its name was changed in 2015.